![]() hardened steel or other exotic alloys, may cause issues. Due to the different thermal properties of a hardened steel nozzle compared to a brass nozzle, you may have to increase the nozzle temperature when printing.įor multi-material printing using the Original Prusa MMU2S, we only provide presets for a 0.25 mm, 0.4 mm, or 0.6 mm brass nozzle. A slight disadvantage of the hardened steel nozzle is that some standard materials like ABS cannot be printed as fast as with a regular nozzle. Always ask your filament vendor if you are not sure about filament requirements. Some examples are ColorFabb XT CF20, ColorFabb Bronzefill, ColorFabb SteelFill, and some glow-in-the-dark filaments. Most of the abrasive materials are composites, plastics with additives. You should note that a hardened steel nozzle is not the same as a stainless steel nozzle. A regular brass nozzle will degrade very quickly and lose its properties when printing these. Hardened steel nozzles are a must for highly abrasive materials. ![]() We support some of them, including the hardened steel nozzle. If you don't have the words "0.25 nozzle", "0.6 nozzle" or "0.8 nozzle" in the profile's name ( green square), the preset is for a 0.4 mm nozzle.Į3D, a UK-based company, that supplies hotends for the Original Prusa i3 printers, has a whole ecosystem of upgrades and add-ons. For how to set a different nozzle size on your printer, please see HW setup (MK2.5/S & MK3/S/+).Įxcept for the presets for the stock 0.4 nozzle, all other nozzle configurations will have the diameter stated in the name of the profile. You can always do the Wizard again and modify the settings. Unclick all the other models and nozzle diameters to avoid confusing the presets. Note that the E3D V6 0.25 mm nozzle has no dots, and looks almost the same as the E3D compatible 0.4 mm nozzle which ships with the Original Prusa MINI. The E3D 0.4 mm nozzles shipped with the Original Prusa MK3S+ have three dots ( blue arrows). On E3D V6 nozzles, you can identify the nozzle diameter by the dots around the rim of the nozzle. By contrast, if you want to speed up the print and the details are not as important, you can try using the 0.6 or 0.8 mm nozzle. We recommend using it only for very small objects, a few centimeters in size, as the print times are considerably longer compared to 0.4mm nozzles. To achieve fine detail, you can use a 0.25 mm nozzle. On top of that, you can always create and customize your own profiles. It is also accessible and reasonable to manufacture, which is probably why many 3D printers are supplied with brass nozzle.īesides the standard 0.4 mm diameter, we provide configurations for 0.25 mm, 0.6 mm, and 0. Brass nozzle 0.25/0.4/0.6/0.8īrass has excellent heat conductivity and is tough enough to print most "everyday" filaments. If you need to change or replace the nozzle, please refer to our guide Changing or replacing the nozzle (MK2.5S/MK3S/MK3S+) or Changing/replacing the nozzle (MINI).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |